Choose from one of two convenient purchase options.

Option 1: Purchase your complete kit outright and save 10%.

Complete Airframe Kit Complete with builders manual and airplane S/N
RAI-1 “Tango”	58,000.00
Kit Options
UV-Protection Tinted Glass	$875.00
Faster Build Options
Stabilator	$4,400.00
Fuselage, Bulkheads, Instrument panel, NACA Ducts	$29,500.00
Wing enclosed, Flight controls fit, fuel tanks leak checked, matched to fuselage, landing gear supports installed	$33,300.00

Option 2: Purchase your kit one sub kit at a time.

Builders Manual &  Airplane S/N You are required to have a Revolution Aviation INC Airplane S/N to purchase any airplane kit or sub-kit.  Purchasing a builders manual purchases the rights to own a kit and build your aircraft.  It also establishes your S/N for all future kit transactions.	$59.95
STABILATOR	$2,995.00
FUSELAGE	$10,995.00
WINGS	$10,475.00
FLIGHT CONTROLS, DOORS & GLASS	$5,495.00
UV-Protection Tinted Glass	$699.00
FINISHING KIT	$14,295.00

The COMPLETE KIT has all of the following 5 sub-kits.

1. STABILATOR Sub-Kit

Stabilator Top Skin
Stabilator Bottom Skin
Spar
Trim Tab
Hardware
   Lead for balancing
   Piano Hinge
   Stabilator attachment bracket

2. FUSELAGE Sub-Kit

Fuselage
Instrument panel
Aft Bulkhead
Center Bulkhead
NACA Ducts – 3
Fuel Bay
Fuel Bay cover
Tunnel
Tunnel Cover
Tail Cone Upper
Tail Cone Lower
Hardware
   Trim Tab Triangle Assembly
   Rudder Pedal Assembly
   Tail skid/tiedown hard point

3. WING Sub-Kit

Upper wing skins
Lower Wing Skins
Main Spar
Aft Spar
Solid Stock
Core Stock
Wing Tips
Wing Fairings
Hardware
Electrical run tube
   Fuel sender guide tubes
   Wingtip attachment hinges
   Tie down/jacking hardpoint plates

4. Flight Controls, Doors & Glass

Flaps
Ailerons
Rudder
Doors
Windows
Hardware
   Aileron attachment brackets
   Flap attachment brackets
   Rudder attachment brackets
   Latches
   Hinges

5. Finishing Sub-Kit

Gear
Brakes
Tires
Axle
Seats
Seatbelts
Tunnel Hardware
Lights
Fuel Pump
Fuel Senders
Fuel Filter
Fuel Selector
Tubing and fittings

ADDITIONAL ITEMS

“Under the Cowl Kit”

$4,395.00

Use this kit if you are going to install a used Lycoming style engine or an alternate engine of your choosing.  The kit is designed to fit Lycoming IO-340, and IO-360 type engines, with little or no modifications.  Using other engines may require significant modifications to the engine mount and or cowling.

Kit Contents

Basic Cowling Upper
Basic Cowling Lower
Air Intake Scoop
NACA Ducts – 2
6061 Aluminum firewall material with Fiberfrax heat resistant cloth
Engine Mount Base — 6 pt firewall attachment and nose gear support.
   This provides the correct base for designing your custom engine mount.

Pricing subject to change without notice!

Join us at Revolution Aviation Build Centers!

   build fast…..

                   fly faster